Home
»
Decoflair
»
Ceiling
»
DIY Ceiling Moldings
»
D7-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 40 x 45 x 2000 - 1 piece

D7-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 40 x 45 x 2000 - 1 piece

D7-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 40 x 45 x 2000 - 1 piece

D10-INTERNAL-CORNERS Ceiling molding HD polystyrene 80 x 80 x 190 - 1 piece

D8-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 50 x 50 x 190 - 1 piece

Installing ceiling molding has never been easier thanks to pre-cut 90° angles. Skip the cutting step and glue this 19cm inside corner in no time with a little glue. CM. All you need to do is add a length of 2 meters, leaving a 3mm gap for the joint, and continue throughout the room. The D7 model is lightweight and can be used to cover small cracks to ensure a sleek transition between the wall and the ceiling.

Quantity	Discount	You Save
10	5%	€5.09
20	7%	€14.26
50	10%	€50.94

D7 DECOFLAIR Polystyrene ceiling molding 45 x...

€11.05 (tax incl.)

D7-ROOMKIT DECOFLAIR Polystyrene ceiling...

€79.56 (tax incl.)

Decoflair CM500 - Colle - 235 x 50 x 50 mm - 1 pièce

CM500 DECOFLAIR Glue 235 x 48 x 68 - 1 piece

€5.95 (tax incl.)

Description

Glue :

The quantity of glue required for installation is easy to define using the Noël & Marquet glue consumption calculator (https://bit.ly/3P61U0x) or the Decoflair glue consumption calculator (https://bit.ly/44PTEI8). It will allow you to know the number of putty glue cartridges required for installation.

Painting :

Polystyrene products should only be painted with solvent-free acrylic paint.

Polyurethane products can be painted with any type of paint (it is nevertheless advisable to carry out a test beforehand).

Installation :

The accessories necessary for successful professional quality installation are:

Mastic glue allows you to glue your moldings, create assembly joints and correct small imperfections,
The special cutting box for moldings and cornices allows you to create perfect angles whatever the molding profile,
The special fine-toothed polystyrene saw allows you to make precise, flawless cuts on this material,
The special HD polystyrene and polyurethane saw with medium teeth allows you to make precise and flawless cuts on these materials.
Additional installation accessories such as: cartridge gun, spatula, sponge.

Manufacturer :

The NMC company is the European leader in manufacturers of decorative polystyrene and polyurethane moldings. All Noël & Marquet and Decoflair products meet the requirements of European quality standards.