Home
»
Decoflair
»
Ceiling
»
DIY Ceiling Moldings
»
CL11 DECOFLAIR Profile for HD Polystyrene lighting 50 x 33 x 2000 - 1 piece

CL11 DECOFLAIR - Profilé pour éclairage Polymère HD extrudé - 50 x 33 x 2000 mm - 1 pièce

CL11 DECOFLAIR Profile for HD Polystyrene lighting 50 x 33 x 2000 - 1 piece

F8 DECOFLAIR Ceiling molding Polyurethane 42 x 42 x 2000 - 1 piece

D13-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 50 x 45 x 190 - 1 piece

With the CL11 light cornice, play with shadows and textures in your project. Its modern design complements any contemporary interior, while indirect LED lighting adds atmosphere and warmth. Made from quality materials, the CL11 minimalist cornice is entirely recyclable. The CL11 is ready to use, simply personalize it by painting it and then easily stick it on. The molding, which is resistant to shocks and humidity, adapts perfectly to bathrooms and kitchens.

Quantity	Discount	You Save
10	5%	€7.81
20	7%	€21.88
50	10%	€78.14

CM500 DECOFLAIR Glue 235 x 48 x 68 - 1 piece

€5.95 (tax incl.)

MB1 DECOFLAIR - Outil Bois - 149 x 213 x 444 mm - 1 pièce

MB1 DECOFLAIR Wood Tool 150 x 215 x 445 - 1 piece

€24.14 (tax incl.)

SAW50CM Saw 50cm WALLSTYL ARSTYL DOMOSTYL Noël...

€45.13 (tax incl.)

Description

Glue :

The quantity of glue required for installation is easy to define using the Noël & Marquet glue consumption calculator (https://bit.ly/3P61U0x) or the Decoflair glue consumption calculator (https://bit.ly/44PTEI8). It will allow you to know the number of putty glue cartridges required for installation.

Painting :

Polystyrene products should only be painted with solvent-free acrylic paint.

Polyurethane products can be painted with any type of paint (it is nevertheless advisable to carry out a test beforehand).

Installation :

The accessories necessary for successful professional quality installation are:

Mastic glue allows you to glue your moldings, create assembly joints and correct small imperfections,
The special cutting box for moldings and cornices allows you to create perfect angles whatever the molding profile,
The special fine-toothed polystyrene saw allows you to make precise, flawless cuts on this material,
The special HD polystyrene and polyurethane saw with medium teeth allows you to make precise and flawless cuts on these materials.
Additional installation accessories such as: cartridge gun, spatula, sponge.

Manufacturer :

The NMC company is the European leader in manufacturers of decorative polystyrene and polyurethane moldings. All Noël & Marquet and Decoflair products meet the requirements of European quality standards.